Monday, December 28
Happy New Year
Give your bear a brightly coloured vest, party hat and whistle and add a "Happy Birthday" or "Congratulations" greeting to his flag. Dress him in green for a "Good Luck" or "St. Patrick's Day" card or add an all occasion greeting such as "For You" or "Best Wishes" and build up your stash.
Tuesday, December 15
Monday, December 14
Friday, December 11
Sunday, November 29
Sunday, November 22
Friday, November 20
- a stamped or printed image - must be waterproof ink
(print or stamp on good quality flat white cardstock)
- absorbent cloth or paper towel
- a variety of water colour markers or felt tip pens
- small paint brush
- water container
- a non-absorbent surface (I use an acrylic block)
1. Scribble some colour on to your non-absorbent surface. I use an acrylic block because it is convenient and of a good size. You could also try a small piece of glass, a pallette pad, a sheet of acetate or even a plastic sleeve from a folder. It doesn't matter so long as the colour cannot be absorbed into the surface.
2. Allow some water to absorb into your paint brush, then add it to the colour on your acrylic block. You are watering down the ink to a much thinner, wetter consistency. Add as much or as little water as you wish depending on the depth of colour you want to achieve. Fill in the printed image as you would if painting. Try and work quickly as the colour will absorb and dry unevenly if it is allowed to sit for any length of time. If you have a particularly large area to colour it's a good idea to use a larger brush for quicker application.
3. When you add a shadow to an image it is generally done by applying a colour that is a darker tone, but with this technique, we are applying shadows by increasing the depth or amount of colour in certain areas. Wash off your brush and apply enough clean water to make it moist but not dripping. Now you want to pick up the colour only on the very tip of your brush. Do this by swiping the tip of the brush gently through the colour.
4. Apply the colour at the darkest area of the image, which would be the outer edges. Lay the brush almost flat as you apply colour. The water held further up the bristles will dilute the colour as it leaves the tip giving you a nice even, graduating shadow. If you are left with a very distinct line of colour, simply rinse the brush and gently apply some clean water over the area until the colour evens out. Be careful not to overwork it or the paper will start to disintergrate and come away.
5. Complete all the basic colour and shading. When applying darker areas think about the way the light hits an object leaving shadows on the opposite side to the light source. We also have shadows in areas that recede such as eye sockets or under the edges of clothing and in folds of fabric.
6. Add a little colour to the cheeks of your bear by painting clean water on the area you wish to colour first. Apply diluted red or pink colour by gently touching the brush to the moistened cardstock. The colour will bleed into the moistened area. If the colour is too intense, simply wipe the excess water out of your brush and then touch the coloured area again. Your brush will soak up some of the liquid.
7. Feel free to add extra areas of detail with the pen applicator. This will allow you to get into those tight areas, increase the intensity of colour, or apply extra details as I have on the cape of the little pink bear.
8. When you are happy with the colouring of your image, allow it to dry and then use it as an embellishment on a card, off the page project or scrapbook layout. You can leave the image on the background of white cardstock, or you can cut around the image and apply it to a different background as I did with the little white bear wearing the blue cape.